Samsung Galaxy S7 Screen Repair, Teardown and Reassemble – Fixez.com
This step-by-step fixing video clip will show you how to replace a damaged or broken Galaxy S7 display, as well as likewise just how to completely teardown and reassemble your Samsung smartphone. See Fixez.com for all of the DIY Samsung Galaxy S7 replacement devices, components and screens you need to swiftly, and economically, fix your device!
If you require your Samsung Galaxy S7 repaired ASAP instead- we have you covered there also. Get in touch with among our competent technicians at 866-233-6460 or [email protected] and also they will certainly repair your Samsung phone for you. They are available Monday– Friday, 9am to 5pm PST.
Sign up for our YouTube Channel for extra DIY mobile phone as well as tablet teardown as well as repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom
Samsung Galaxy S7 Screen Repair, Teardown as well as Reassemble Guide Video Transcription:
Warning:
You are executing this repair work at your very own danger
We assert no duty for any type of problems that could take place
Locate the costs tools made use of during this DIY repair service below: https://www.fixez.com/categories/repair-tools
Action 1
Power down your Samsung Galaxy S7 phone.
Step 2
Get rid of the Nano SIM card as well as microSD card tray.
Action 3
The Samsung Galaxy S7 rear panel is peacefully glued on as well as is a tight fit within the structure. Apply warmth to soften the adhesive.
With the precision knife produce adequate area to insert a plastic triangle opening up tool.
Usage triangle opening devices to slice through the glue and also aid meticulously separate the glass back panel from Galaxy S7 phone. Apply added warmth as required.
Step 4
Get rid of the following 12 Phillips screws.
With the tweezers, remove the 3 modular pieces. These individual components are attached to the motherboard by method of tiny spring calls, they include the S7’s antennas, loudspeaker, as well as wireless billing coil.
Tip 5 (Samsung Galaxy S7 Battery).
Detach the S7 battery from the motherboard.
The battery is well wedged and also adhered in position. Use a triangular opening tool to function around the battery and also established it free from the sticky securing it to the frame.
Eliminate the 3000 milliampere-hour (mAh) Galaxy S7 battery from the phone.
Step 6.
Remove and get rid of the Samsung Galaxy S7 5-megapixel front-facing selfie cam.
Action 7.
Separate the wide variety of wires from the motherboard. Consisting of the daughterboard connector on its underside.
Eliminate the Galaxy S7 motherboard.
Step 8.
With the spudger, separate the 12-megapixel Galaxy S7 rear-facing cam and eliminate it from the motherboard.
Step 9.
Use the tweezers to very carefully remove the S7 spring-contact used vibe.
Pry up and get rid of the earpiece speaker.
With the tweezers, peel up and get rid of the Galaxy S7 distance sensor, ambient light and notification LED cable.
Action 10.
Utilizing the tweezers, tear up the quantity buttons wire, followed by the little bracket, and also remove both from the S7 phone.
Remove the power switch cable television, then the bracket from the side of the S7 structure.
Action 11.
Disconnect the signal cord from the S7 daughterboard.
Remove the complying with Phillips screw.
Separate and easily remove the S7 headphone jack, total with rubber seal.
Step 12.
Use the warm gun heat up the adhesive safeguarding the Galaxy S7 LCD screen and digitizer setting up to the frame.
With the precision knife, very carefully develop splitting up as well as put a triangular opening tool to start slicing with the adhesive.
Take your time as well as apply extra warm as needed. Work around the S7 phone using a mix of triangle opening devices and also a playing card.
Be mindful of the house switch and also lower soft switches when decoupling the S7 screen setting up from the structure when you have actually cut via the adhesive.
Tip 13.
Remove the complying with 2 Phillips screws.
Flip the frame over and also peel off up the adhesive.
Feed the cord thru the framework and eliminate the Galaxy S7 residence switch with finger print scanner.
Peel up the S7 soft button LED cable televisions.
With the tweezers, and a little assistance from the spudger, carefully remove the Samsung Galaxy S7 micro USB Port setting up from the framework. The setting up likewise includes the main microphone and soft button cords.
* To rebuild your device, comply with the steps in reverse order.
