Samsung Galaxy S7 Edge Screen Repair, Teardown and Reassemble Guide – Fixez.com

Go to Fixez.com for all of the Do It Yourself Galaxy S7 Edge substitute components, tools and also displays you require to repair your Samsung cell phone rapidly, as well as economically. https://www.fixez.com/store/samsung/samsung-galaxy-s7-edge

If you require your S7 Edge repaired ASAP rather- we have you covered there also. Contact one of our competent specialists at 866-233-6460 or [email protected] and they will certainly repair your Samsung tool for you. They are readily available Monday– Friday, 9am to 5pm PST.

Register for our YouTube Channel for added DIY mobile phone as well as tablet computer teardown and repair work video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

Samsung Galaxy S7 Edge Screen Repair, Teardown and also Reassemble Guide Video Transcription:

Warning:

You are doing this repair work at your very own danger
We assert no obligation for any problems that could take place

Find the costs tools made use of during this DIY repair work right here: https://www.fixez.com/categories/repair-tools

Step 1

Power down your Samsung Galaxy S7 Edge phone.

Step 2 (Samsung Galaxy S7 Edge SIM Card and microSD Card Tray).

Remove the Nano SIM card and also microSD card tray.

Action 3 (Samsung Galaxy S7 Edge Rear Panel).

The Samsung Galaxy S7 Edge back panel is glued on sturdily and also is a limited fit within the frame. Apply warm to soften the adhesive.

With the precision blade develop sufficient room to place a playing card.

Use playing cards to cut via the adhesive as well as help carefully different the back panel from Galaxy S7 Edge phone. Apply extra warmth as needed.

Tip 4 (Samsung Galaxy S7 Edge Antennas, Wireless Charging Coil and Loudspeaker).

Eliminate the adhering to 12 Phillips screws.

With the spudger, pry up and eliminate the 3 modular pieces. These individual components are attached to the motherboard by means of small springtime calls, they include the S7’s antennas, loudspeaker, and cordless charging coil.

Tip 5 (Samsung Galaxy S7 Edge Battery).

Remove the S7Edge battery from the motherboard.

The battery is well wedged and also adhered in location. Usage triangle opening tools to work around the battery and also set it devoid of the sticky safeguarding it to the frame.

Get rid of the 3000 mAh Galaxy S7 Edge battery from the phone.

Action 6 (Samsung Galaxy S7 Edge Motherboard).

Disconnect the collection of cords from the Galaxy S7 Edge motherboard.

Lift up the motherboard as well as detach the daughterboard port on its bottom, then remove it from the smart device.

Step 7 (Samsung Galaxy S7 Edge Front-Facing Camera and also Rear-Facing Camera).

Detach as well as remove the S7 Edge 5-megapixel front-facing selfie video camera.

With the spudger, detach the 12-megapixel Galaxy S7 Edge rear-facing video camera and eliminate it from the motherboard.

Tip 8 (Samsung Galaxy S7 Edge Vibrator, Earpiece Speaker and also.

With the tweezers, carefully eliminate the S7 Edge spring-contact used vibrator.

Pry up and get rid of the earpiece speaker.

Utilize the tweezers to peel up as well as eliminate the closeness sensor, ambient light and also alert LED cable.

Tip 9 (Samsung Galaxy S7 Edge Power Button Cable as well as Volume Buttons Cable).

Get rid of the power button wire, and after that the bracket from the side of the S7 Edge framework.

Using the tweezers, tear up the volume buttons cable, followed by the small bracket, as well as remove them from the S7 Edge phone.

Step 10 (Samsung Galaxy S7 Edge Headphone Jack).

Separate the signal cord as well as headphone jack cable from the S7 Edge daughterboard.

Remove the adhering to Phillips screw.

Conveniently get rid of the S7 Edge headphone jack, full with rubber seal.

Action 11 (Samsung Galaxy S7 Edge LCD Screen and also Digitizer Assembly).

Make use of the warm weapon heat up the glue safeguarding the Galaxy S7 Edge LCD and digitizer setting up to the framework.

With the precision blade, thoroughly produce splitting up and also put a playing card to begin slicing via the adhesive.

Take your time and use added warmth as needed.

Be conscious of the house switch as well as bottom soft switches when decoupling the S7 Edge display setting up from the framework as soon as you have cut through the adhesive.

Action 12 (Samsung Galaxy S7 Edge Home Button).

Peel up the adhesive protecting the S7 Edge house switch cable television to the framework.

Feed the cable television thru the structure and also get rid of the home switch.

Step 13 (Samsung Galaxy S7 Edge Micro USB Port, Microphone and also Soft Button Cables).

Peel up the S7 Edge soft button LED cables.

Eliminate the following 2 Phillips screws.

With the tweezers, very carefully get rid of the Samsung Galaxy S7 Edge micro USB Port assembly from the framework. The setting up additionally consists of the main microphone and soft button wires.