Phone Repair Equipment 5 in 1 OCA Vacuum Laminating Machine ,No Need Vacuum Pump,No Need Air Compressor Jiutu
Key Features:
1, New Design for Small Repair Shops.It Fit for All LCD Screens Under 6.6", It Is Good For apple iphone, Samsung, HTC, LG LCD Screens Etc.
2, No Need Bubble Remover, This Machine Can Be Used For Both Laminator and Autoclave Bubble Remover.
3, No Need Vacuum Pump, No Need Air Compressor. No Need Molds.
4, The Whole Process Will Only Cost 300 Seconds Around 5 Minutes.Vacuum Time: 60Seconds About 1 Minute.Bubble Removing Time: About 4 Minutes.
5, There Are 3 Buttons On the Machine, One for" Start" One for" Stop ", One for "Bubble Remover ". The Middle One Button "Button Remover" Can Be Used Separately.You Can Just Click This Button to Remove Bubbles Only.
6, After the Process Complete, It Will Take 2 Seconds to Release the Air Inside, Then You Can Open the Door.
7, The Machine Will Work Under 220V voltage, If Your Site Is 110V, Please Get One Power Transformer.
8, Machine Size: 32x28x43cm, The Lamination Area Size: 7 inch Diameter Around 18mm. Net Weight 30kg.
9, A Good News, Now We Have Promotion For This Machine, Besides the Good Prices, We Provide Below Parts completely free:.
1) Front Panel Glass White 10pcs, Black 10pcs For iPhone 6G.
2) Bezel Frame White 10pcs, Black 10pcs For apple iphone 6G.
3) OCA Film 50pcs Mitsu bishi Type For apple iphone 6G.
4) Original Polarizer Film,20 pcs For iPhone 6G.
5) Aluminum Alignment Mold 1pcs For iPhone 6G.
Note: 1, Please do not fret, if you are not so aware of the machine, we will certainly show you about the abilities, please kindly contact us already.
3, Demo video clip is offered, please contact us.
4, If there is no unique need, we will write you the global common electrical power converter.
