Motorola Droid Turbo 2 Screen Repair, Teardown and Reassemble – Fixez.com

https://www.fixez.com provides the official Motorola Droid Turbo 2 Screen Repair, Teardown and also Reassemble Guide. This detailed repair service video will reveal you how you can change a damaged or busted Droid Turbo 2 display setting up, as well as additionally ways to completely teardown and also reconstruct your Motorola phone. Visit Fixez.com for every one of the DIY Motorola Droid Turbo 2 replacement components, tools as well as screens you should quickly, as well as cost effectively, fix your gadget! https://www.fixez.com/store/motorola/motorola-droid-turbo-2

If you require your Droid Turbo 2 fixed ASAP instead- we have you covered there too. Get in touch with one of our skilled professionals at 866-233-6460 or [email protected] and also they will certainly fix your Motorola phone for you. They are available Monday to Friday, 9am to 5pm PST.

Sign up for our YouTube Channel for additional DIY smart device and also tablet computer teardown and also repair work video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

Motorola Droid Turbo 2 Screen Repair, Teardown as well as Reassemble Guide Video Transcription:

Warning:

You are performing this fixing at your own danger
We declare no duty for any kind of problems that could happen

The DIY Motorola Droid Turbo 2 repair work tools used in this video can be found here: https://www.fixez.com/categories/repair-tools

Step 1

Power down your Droid Turbo 2 mobile phone.

Step 2 (Motorola Droid Turbo 2 SIM Card and also microSD Card Tray).

Eliminate the SIM card and microSD card tray.

Step 3 (Motorola Droid Turbo 2 Back Cover).

Utilize the warmth weapon to warm up the glue securing the Droid Turbo 2 rear cover to the midframe.

With the precision blade, very carefully produce splitting up as well as insert a plastic triangle opening device to begin slicing through the adhesive.

Take your time and also use extra heat as needed. The glue safeguarding the cover is reasonably light, once the pick sneaks into the joint, the cover can be peeled up.

Step 4 (Motorola Droid Turbo 2 Midframe).

Remove the adhering to 17 T4 Torx screws.

Utilize the tweezers to remove the 2 plastic covers then separate the adapters below.

You can now quickly divide the Droid Turbo 2 midframe.

Step 5 (Motorola Droid Turbo Power & Volume Buttons, Headphone Jack, Vibrator, as well as LED Flash Cable and also Microphone).

Remove the physical power and also quantity buttons from the side of the midframe.

Pry the earphone raise as well as from the chassis.

Eliminate the Droid Turbo 2 vibe.

Peel up the item of Kapton tape, then release the ZIF connector.

Meticulously peel up the Droid Turbo 2 dual-LED flash cord and also microphone.

Step 6 (Motorola Droid Turbo 2 Loudspeaker, Inductive Charging Coil, Rear Camera Lens as well as Flash Bezel, and LED Flash).

Use the spudger to tear the Droid Turbo 2 loudspeaker up from the plastic midframe.

Get rid of the inductive charging coil.

Transform the midframe over and also remove the Motorola Droid Turbo 2 back camera lens as well as flash bezel.

Utilizing the tweezers, remove the dual-LED flash.

Action 7 (Motorola Droid Turbo 2 Front-Facing Camera and Earpiece Speaker).

Peel up the black tape.

Eliminate the following 2 T4 Torx screws, and afterwards the brace.

Separate the Droid Turbo 2 battery from the motherboard.

Use the spudger to separate and also eliminate the 5 MP Droid Turbo 2 front-facing selfie video camera.

Making use of the tweezers, tear up the earpiece audio speaker.

Tip 8 (Motorola Droid Turbo 2 Motherboard).

Disconnect the bunch of cables from the motherboard.

With the wires separated, carefully complimentary the Motorola Droid Turbo 2 motherboard from the display screen setting up.

Tip 9 (Motorola Droid Turbo 2 IR Sensor Cable as well as Rear-Facing Camera).

Release the ZIF adapter and remove the IR sensor cord.

Peel up the Kapton tape and release the ZIF port.

Conveniently pluck out the 21 MP Motorola Droid Turbo 2 rear-facing video camera.

Action 10 (Motorola Droid Turbo 2 Battery).

With a little spudgering the 3760 milliampere-hour (mAh) Droid Turbo 2 lithium-ion battery can be gotten rid of.

Step 11 (Motorola Droid Turbo 2 Power and also Volume Buttons Flex Cable).

Very carefully peel up and also eliminate the Droid Turbo 2 power and also quantity buttons flex cord.

Action 12 (Motorola Droid Turbo 2 LCD Screen and Digitizer Assembly).

Peel up the screen setting up wire, it is safeguarded to the structure with reasonably mild adhesive.

Different the plastic bezel from the structure.

Make use of the warmth gun to heat up the glue protecting the Motorola Droid Turbo 2 LCD screen and also digitizer assembly to the front structure.

With a triangle opening device, job around the Droid Turbo 2 display slicing via the adhesive.

Take your time and use additional heat as needed.

As soon as you have actually cut via the sticky, bear in mind the ribbon cord when decoupling the Droid Turbo 2 screen assembly from the frame.

* To rebuild your gadget, comply with the action in reverse order.