Lenovo ZUK Z2 Teardown Slideshow (Disassembling) – Review

Lenovo ZUK Z2 Teardown

1. Firstly, get rid of the SIM card tray. It is supported twin Nano SIM card.

2. Warmth up the sides of the back cover with a warmth weapon concerning 3-5 mins.
And after that open up the back cover with a suction cup.

3. Remove 7 screws protecting the top center structure.

4. On the back of the leading center framework, we can discover the front camera.

5. Get rid of the speaker module by removing five screws.

6. Remove the screws securing the metal plate and disconnect the battery adapter from the motherboard.

7. Take out two double-sided tapes as well as you can get rid of the battery.

8. Lenovo ZUK Z2 comes with a 3500mAh Li-polymer battery.

9. Right here’s Lenovo ZUK Z2 chassis.

10. All major chips are covering with a metal shield, as well as there is a layer of graphite sticker label on the metal shield.

11. Here’s USB Type-C port.

12. Lenovo ZUK Z2 features a Samsung most current 2M8 13MP video camera sensor. It is assistance PDAF+CAF double focus setting, could be accomplished 0.1 seconds concentrate speed.

13. The bottom board is incorporated a vibrating motor, a microphone as well as a 3.5 mm earphone jack.

14. Remove two screws protecting the side switch module.

15. Right here’re Lenovo ZUK Z2 quantity secrets and also lock display switch.

16.U-Touch button.

17. Fingerprint sensor component.

18. Qualcomm Sanpdragon 820 + Samsung 4GB RAM
Samsung 64GB ROM
Qualcomm PM8996 Power Management IC
Qualcomm SMB1351 quick charging IC

19. Qualcomm PM8996 Power Management IC
Qualcomm QCA6164A Wi-Fi IC
Qualcomm WCD9335 Audio decoder chip
Qualcomm WTR3925 RF
QROVO QM58101 PA
.