iPhone SE Teardown and Reassemble – Fixez.com

This HD video will show you just how to completely take apart as well as reconstruct your iPhone SE mobile phone. Visit Fixez.com for all of the DIY apple iphone SE substitute parts, displays and also devices you need to fix your cell phone promptly, as well as economically.

If you require your iPhone SE fixed ASAP instead- we have you covered there also. Call among our skilled technicians at 866-233-6460 or [email protected] as well as they will repair your Apple gadget for you. They are available Monday– Friday, 9am to 5pm PST.

Sign up for our YouTube Channel for extra DIY smartphone and tablet computer teardown as well as repair video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

iPhone SE Teardown and Reassemble Guide Video Transcription:

Warning:

You are executing this repair work at your own threat
We assert no responsibility for any kind of problems that may take place

Discover the premium tools utilized throughout this DIY repair here: https://www.fixez.com/categories/repair-tools

Step 1
Power down your Apple iPhone SE smart device.

Action 2
Get rid of the two bottom 3.4 mm Pentalobe screws located next to the lightning port.

Action 3
Location a suction cup near the residence button.

While using company, constant pressure, make use of the plastic triangle opening device to work around the screen setting up and also separate it from the apple iphone SE rear situation.

Just like the iPhone 5s, lurking underneath the iPhone SE display screen is the touch ID wire. Do not draw the display up too far without first getting rid of the brace and also disconnecting the cord.

The display screen assembly is still connected to the iPhone by several cable televisions, so do not attempt to remove it entirely just.

Step 4
Get rid of the complying with 4 Phillips screws securing the metal bracket to the motherboard. These screws are various sizes, so make certain to keep in mind where they go.

Utilize the fine tip curved tweezers to get rid of the metal bracket and also separate the LCD, digitizer, and front electronic camera and also distance sensing unit wires.

Tip 5
Eliminate the following 3 Phillips screws protecting the residence button wire and also the metal bracket in location.

Remove the steel brace and afterwards with the tweezers peel the iPhone SE residence button far from the screen assembly.

Action 6
Remove the adhering to 7 Phillips screws.

With the tweezers remove the steel clip and after that the apple iphone SE earpiece audio speaker.

Step 7
Carefully tear the front video camera as well as closeness sensing unit bow cable away from the screen setting up.

Currently, separate the iPhone SE front-facing electronic camera and distance sensing unit cable television from the LCD protect plate.

Step 8
Get rid of the following 2 Phillips screws and afterwards the steel bracket.

With the spudger, remove the iPhone SE 3.8-volt battery from the logic board.

Use the great idea bent tweezers to peel off up the glue tabs at the end of the battery.

Grab the tabs and aim to keep the sticky level as well as vast.

Slowly draw the sticky far from the apple iphone SE. The adhesive will certainly stretch to lot of times the size of the battery, keep pulling until they appear from between the battery and also the iPhone’s rear situation.

Remove the apple iphone SE battery.

Tip 9
Detach the signal wire and after that the apple iphone SE lightning port and also earphone jack setting up wire from the reasoning board.

Eliminate the complying with 7 Phillips screws then the tiny brace.

The iPhone SE loudspeaker setting up is now cost-free and can be taken out.

Step 10
With a little spudgering the lightning port and headphone jack assembly can be gotten rid of from the apple iphone SE.

Step 11
Use the tweezers to get rid of the piece of tape and after that separate the rear-facing camera from the apple iphone SE reasoning board.

The 12-megapixel iPhone SE rear-facing camera can currently be eliminated.

Step 12
With the tweezers separate the apple iphone SE power and quantity switches ribbon cable television.

Use the flathead screwdriver to eliminate the complying with 4 screws.

Currently, remove the complying with 4 Phillips screws.

Very carefully lift the apple iphone’s reasoning board up as well as separate the Bluetooth and Wi-Fi antenna adapter prior to removing it from the iPhone SE.

Step 13
Eliminate the complying with 5 Phillips screws and also after that the metal bracket over the vibe.

Eliminate the following Phillips screw then with the tweezers obtain the vibrator.

Action 14
Eliminate the complying with 2 Phillips screws and afterwards the metal brace.

Now, get rid of the last Phillips screw.

Use a combination of the spudger and also tweezers to eliminate the apple iphone SE power and volume buttons wire. The cord also includes a call for grounding.

With the wire out of the method you can remove the physical power and also lock button, volume switches and also the vibrate button.

Step 15
Carefully utilize the tweezers and spudger to get rid of the apple iphone SE Bluetooth and Wi-Fi antenna from the back case.