iPhone 7 Plus Teardown and Reassemble Guide – Fixez.com
https://www.fixez.com presents the official iPhone 7 Plus Screen Replacement, Teardown and also Reassemble Guide. This detailed repair work video will certainly reveal you the best ways to fix a broken or damaged iPhone 7 Plus 5.5″ screen setting up, as well as exactly how to completely teardown as well as reconstruct your Apple phone. Browse through Fixez.com for all the DIY iPhone 7 Plus replacement screens, tools and components you should quickly, and also affordably, fix your tool!
https://www.fixez.com/store/iphone/iphone-7-plus
https://www.fixez.com/categories/repair-tools
Register for our YouTube Channel for extra DIY smartphone and tablet teardown as well as repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom
iPhone 7 Plus Screen Repair, Teardown and also Reassemble Guide Video:
Action 1 – Power down your Apple apple iphone 7 Plus phone.
Step 2 – Eject the Nano-SIM Card Tray.
Tip 3 – Remove the two lower 3.4 mm Pentalobe screws situated beside the lightning adapter.
With the opening tool slice with the extreme glue and also assist meticulously decouple the apple iphone 7 Plus display screen setting up from the back instance. Unlike previous iPhone versions the 7 Plus bizarrely opens up to the side. Separate the cord and complimentary the apple iphone 7 Plus screen setting up from the phone.
Step 5 – Remove the following 5 Phillips screws, complied with by the steel clip they secure in location. Quickly remove the stereo-enabling speaker. Utilize the tweezers to assist get rid of the tangled up apple iphone 7 Plus Front-Facing Camera Cable Assembly. It consists of the front-facing electronic camera, microphone, distance sensing unit and ambient light sensor.
Step 6 – Remove the adhering to 4 Tri-Point screws and after that the steel brace. Dividing the solid state iPhone 7 Plus residence switch is simple, with just light sticky on the cord as well as no fragile gasket.
Action 7 – Remove the following Phillips screw, and afterwards the 5 Tri-Point screws. With no adhesive on the iPhone 7 Plus LCD shield plate, as well as the cables perfectly managed, just lift it far from the screen assembly.
Eliminate the complying with 2 Phillips screws and also after that elevate it out of the apple iphone 7 Plus back case. Remove and release the iPhone 7 Plus Taptic Engine.
Slowly as well as gently draw each strip up as well as away from the iPhone 7 Plus. Pop the 2900 milliampere-hour (mAh) apple iphone 7 Plus battery.
Step 10 – Remove the following Phillips screw as well as standoff screw. Utilize the spudger to separate the two 12 MP iPhone 7 Plus rear-facing cams and also tear them out of the chassis.
Step 11 – Before excavating the apple iphone 7 Plus logic board out of the back instance, it is necessary to assault a bunch of Phillips as well as standoff screws, dispatch of a couple of connectors, and also remove sections of the antenna setting up. After taking care of the last 3 adapters, very carefully root out the apple iphone 7 Plus reasoning board out of the back instance.
Action 12 – Remove the adhering to 4 Phillips screws and eliminate the apple iphone 7 Plus loudspeaker.
Tip 13 – Remove the complying with 7 Phillips screws. Use the tweezers to divide the microphones from the audio speaker grilles. The apple iphone 7 plus Lightning connector assembly is moderately followed the rear case, but with a little spudgering it is easily removed.
Action 14 – Remove the following 6 Phillips screws. The last part to give up is a cable selection that contains the power as well as quantity switch changes, quad-LED flash, a microphone, and the ring/silent button.