HTC One A9 Screen Repair, Teardown and Reassemble Guide – Fixez.com
https://www.fixez.com offers the official HTC One A9 Screen Repair, Teardown and also Reassemble Guide. This detailed fixing video clip will certainly show you how to replace a damaged or damaged HTC One A9 display assembly, and how you can completely teardown as well as reconstruct your HTC smartphone. Visit Fixez.com for all the DIY HTC One A9 substitute screens, devices as well as parts you have to rapidly, as well as affordably, repair your gadget! https://www.fixez.com/store/htc/htc-one-a9
If you require your HTC One A9 fixed ASAP rather- we have you covered there as well. Contact among our experienced professionals at 866-233-6460 or [email protected] and they will repair your HTC phone for you. They are offered Monday– Friday, 9am to 5pm PST.
Register for our YouTube Channel for added DIY smartphone and also tablet teardown as well as repair video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom
HTC One A9 Screen Repair, Teardown and Reassemble Guide Video Transcription:
Warning:
You are doing this repair at your personal risk
We assert no duty for any kind of damages that could happen
The DIY HTC One A9 repair tools made use of in this video clip can be located below: https://www.fixez.com/categories/repair-tools
Action 1
Power down your HTC One A9 smartphone.
Step 2 (HTC One A9 Nano SIM Card Tray as well as microSD Card Tray).
Eject the Nano SIM card tray as well as then the microSD card tray.
Step 3 (HTC One A9 Display Assembly).
Begin to free the HTC One A9 display assembly by utilizing the warm gun to warm up the adhesive.
With the precision knife very carefully develop splitting up and also put a playing card to begin slicing through the adhesive.
Take your time as well as use additional warmth as needed.
When attacking the sticky, be conscious of the capacitive house switch as well as finger print sensor.
The HTC One A9 display is still connected to the motherboard. Do not attempt to remove it totally, or you will certainly harm the data cord connecting the display screen to the middle of the phone.
Eliminate the complying with 2 Phillips screws safeguarding the brace to the motherboard.
Remove the HTC One A9 display screen wire bracket.
Use the spudger to disconnect the screen wire as well as remove the HTC One A9 display screen setting up.
Step 4 (HTC One A9 Midframe).
Remove the adhering to 8 T5 Torx screws.
Use the precision knife as well as a triangular opening device to pop the HTC One A9 midframe from the rear enclosure.
Tip 5 (HTC One A9 Battery).
Spudge up the HTC One A9 battery adapter from the motherboard.
Peel the 2150 milliampere-hour (mAh) HTC One A9 battery off the glue securing it to the phone.
Action 6 (HTC One A9 Motherboard).
Overcome the wide range of cords on the HTC One A9 motherboard.
Get rid of the adhering to 3 T5 Torx screws.
Quickly decouple the HTC One A9 motherboard from the midframe.
Action 7 (HTC One A9 Rear-Facing Camera and Front-Facing Camera).
Peel up the tape as well as detach the 13-megapixel HTC One A9 rear-facing camera from the motherboard.
Remove as well as free the 4-megapixel HTC One A9 front-facing electronic camera.
Tip 8 (HTC One A9 Vibrator, Earpiece Speaker, SIM Card Bay as well as microSD Card Bay).
Extract the HTC One A9 vibrator, earpiece speaker, and the bays for the SIM and microSD cards, from the top of the midframe.
Tip 9 (HTC One A9 Daughterboard).
Detach the collection of wires from the HTC One A9 daughterboard.
Eliminate the adhering to 4 T5 Torx screws.
Use the spudger to pry up the daughterboard, however do not remove it entirely simply. Turn it over to remove the signal cords as well as completely totally free it from the phone.
Action 10 (HTC One A9 Loudspeaker).
With a little spudgering the HTC One A9 speaker could easily be divided from the daughterboard.
Action 11 (HTC One A9 Headphone Jack and also Capacitive Home Button as well as Fingerprint Sensor).
Make use of the tweezers to pluck out the HTC One A9 headphone jack.
Peel up the HTC One A9 capacitive house button and also finger print sensing unit cable then feed it through the midframe.
* To reassemble your gadget, follow the actions in reverse order.
