How to iPhone SE Screen Repair Guide (LCD and Digitizer/Front Panel) – Fixez.com
https://www.fixez.com presents the official iPhone SE LCD and Digitizer/Front Panel Repair Guide. Life is full of annoyances, but a shattered iPhone SE screen does not have to be one of them! Following the step-by-step instructions we have provided will help you safely replace a cracked or damaged iPhone SE screen. Visit Fixez.com for all of the DIY iPhone SE replacement screens, parts and tools you need to fix your cell phone quickly, and affordably. https://www.fixez.com/store/iphones/iphone-se
If you need your iPhone SE phone repaired ASAP instead- we have you covered there too. Contact one of our skilled technicians at 866-233-6460 or [email protected] and they will fix your Apple device for you. They are available Monday – Friday, 9am to 5pm PST.
Subscribe to our YouTube Channel for additional DIY smartphone and tablet teardown and repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom
iPhone SE Screen Repair Video Transcription:
Warning:
You are performing this repair at your own risk
We claim no responsibility for any damages that might occur
To perform this DIY repair, you will need the following tools:
Plastic Triangle Opening Tool – https://www.fixez.com/plastic-triangle-opening-tool
Suction Cup – https://www.fixez.com/suction-cup
SIM Card Ejection Tool – https://www.fixez.com/sim-card-ejection-tool
Fine Tip Curved Tweezers – https://www.fixez.com/fine-tip-curved-tweezers
Professional Phillips Screwdriver
Professional iPhone Pentalobe Screwdriver – https://www.fixez.com/professional-phillips-screwdriverhttps://www.fixez.com/professional-iphone-pentalobe-screwdriver
Step 1
Power down your Apple iPhone SE smartphone.
Step 2
Remove the two bottom 3.4 mm Pentalobe screws located next to the iPhone SE lightning connector.
Step 3
Place a suction cup near the home button.
While applying firm, constant force, use the plastic triangle opening tool to work around the display assembly and separate it from the iPhone SE rear case.
Just like the iPhone 5s, lurking beneath the iPhone SE display is the touch ID cable. Do not pull the display up too far without first removing the bracket and disconnecting the cable.
The display assembly is still connected to the iPhone by several cables, so don’t try to remove it entirely just yet.
Step 4
Remove the following 4 Phillips screws securing the metal bracket to the motherboard. These screws are different sizes, so be sure to remember where they go.
Use the fine tip curved tweezers to remove the metal bracket and disconnect the iPhone SE LCD, digitizer, and front camera and proximity sensor cables.
Step 5
Remove the following 3 Phillips screws securing the home button cable and the metal bracket in place.
Remove the metal bracket and then with the tweezers peel the iPhone SE home button away from the display assembly.
Step 6
Remove the following 7 Phillips screws.
With the tweezers remove the metal clip and then the iPhone SE earpiece speaker.
Step 7
Gently pry the front camera and proximity sensor ribbon cable away from the display assembly.
Now, if necessary, separate the iPhone SE front-facing camera and proximity sensor cable from the LCD shield plate.
source
