OnePlus 3T Teardown and Reassemble – Fixez.com
See the OnePlus 3T Teardown and Reassemble Guide video as well as have a look inside the current OnePlus front runner awesome. This detailed guide will certainly show you the best ways to entirely teardown and also reassemble your OnePlus 3T, as well as also offers step-by-step fixing instructions. Check out Fixez.com for all the DIY OnePlus 3T replacement tools, displays as well as parts you should promptly, and also economically, repair your gadget!
https://www.fixez.com/store/oneplus/oneplus-3t
https://www.fixez.com/categories/repair-tools
Sign up for our YouTube Channel for added DIY smart device and also tablet teardown and also repair videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom
OnePlus 3T Teardown and Reassemble Guide Video steps:
Action 1
Power down your OnePlus 3T phone.
Action 2 (OnePlus 3T Dual Nano-SIM Card Tray).
Eject the twin Nano-SIM card tray.
Action 3 (OnePlus 3T Rear Case).
Extricate the following 2 T2 Torx screws from all-time low of the OnePlus 3T.
Use the plastic triangle opening up tool to release the clips and after that pop the OnePlus 3T from its anodized light weight aluminum back enclosure. There is no pesky adhesive, making this treatment a snap.
Tip 4 (OnePlus 3T Battery).
Separate the OnePlus 3T battery from the motherboard.
Remove the following Phillips screw and metal bracket.
Spudge up the adjoin cable television as well as the USB-C port cable television from the motherboard.
Get rid of the adjoin cord.
Use the exposed clear plastic draw tab to peel off the 3400 milliampere-hour (mAh) battery off the adhesive safeguarding it to the OnePlus 3T.
Tip 5 (OnePlus 3T USB-C Port, Loudspeaker, Headphone Jack as well as Microphone Assembly).
Loosen the 3 adapters from the USB-C port setting up.
Remove the adhering to 7 Phillips screws.
Easily pry up the OnePlus 3T USB-C port, headphone jack, as well as loudspeaker assembly.
Make use of the spudger to eliminate the little daughterboard. It includes the 3.5 mm earphone jack, a microphone, and some control hardware and springtime get in touches with.
Currently separate the OnePlus 3T USB-C port as well as loudspeaker box.
Action 6 (OnePlus 3T Motherboard).
Disconnect the OnePlus 3T display cord and the signal cord from the motherboard.
Remove the adhering to 7 Phillips screws.
With the cables as well as screws out of the means, cost-free the OnePlus 3T motherboard from the phone.
Step 7 (OnePlus 3T Rear-Facing Camera and Front-Facing Camera).
Separate the 16-megapixel OnePlus 3T rear-facing cam from the motherboard.
Peel up the tape, and also then get rid of the 16-megapixel OnePlus 3T front-facing selfie camera.
Step 8 (OnePlus 3T Earpiece Speaker, Power and Volume Buttons Cable, and Signal Cable).
Tweeze out the spring-contact-connected OnePlus 3T earpiece audio speaker.
With the tweezers in hand, carefully peel up the OnePlus 3T power and volume switches ribbon cable television.
Eliminate the signal cable television from the side of the midframe.
Step 9 (OnePlus 3T Capacitive Home Button and also Fingerprint Sensor).
Extracting the OnePlus 3T capacitive home button and also finger print sensor is a breeze. If concerns develop with the residence button, the absence of solder or adhesive will certainly make it an easy repair.
Action 10 (OnePlus 3T Display Assembly).
Utilize the warmth gun to heat up the adhesive securing the 5.5″ OnePlus 3T display assembly to the frame.
With the accuracy knife, thoroughly produce separation and put a having fun card to begin slicing with the adhesive.
Take your time and use additional warmth as required. Patiently work around the OnePlus 3T AMOLED display screen with playing cards.
Be mindful of the display’s cable television and the cables for the bottom switches when decoupling the screen assembly from the frame as soon as you have sliced through the adhesive.
Action 11 (OnePlus 3T Capacitive Bottom Button Cables).
Meticulously peel up the wires for the OnePlus 3T base buttons from the front panel.
* To rebuild your tool, follow the actions in reverse order.
