Huawei Honor 8 Screen Repair, Teardown and Reassemble – Fixez.com

This step-by-step fixing video clip will certainly show you just how to change a broken or damaged Honor 8 screen setting up, and also how to completely teardown and rebuild your Huawei phone. Check out Fixez.com for all of the DIY Huawei Honor 8 replacement parts, screens and tools you need to rapidly, as well as cost effectively, repair your tool!

If you require your Honor 8 fixed ASAP instead- we have you covered there too. Call among our competent specialists at 866-233-6460 or [email protected] and they will certainly fix your Huawei mobile phone for you. They are available Monday to Friday, 9am to 5pm PST.

Sign up for our YouTube Channel for added DIY mobile phone and also tablet computer teardown as well as fixing video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

Huawei Honor 8 Screen Repair, Teardown as well as Reassemble Guide Video Transcription:

Warning:

You are performing this repair service at your personal risk
We declare no duty for any kind of damages that may occur

The DIY Honor 8 repair work devices used in this video clip could be found right here: https://www.fixez.com/categories/repair-tools

Step 1

Power down your Huawei Honor 8 phone.

Action 2 (Huawei Honor 8 Nano-SIM as well as microSD Card Tray).

Eject the nano-SIM as well as microSD Card Tray.

Step 3 (Huawei Honor 8 Rear Glass Panel).

The Honor 8 back glass panel is glued on solidly as well as is a limited fit within the narrow bezel. Apply heat to soften the adhesive.

With the accuracy knife develop sufficient space to put a triangle opening tool.

Strike the sticky as well as meticulously displace the Honor 8 rear panel from the phone.

The panel is still linked to the Honor 8 by a cord along the top-left side, so don’t attempt to remove it completely simply.

Eliminate the adhering to Phillips screw securing the brace that covers the display cable and the fingerprint sensing unit port.

With the brace out of the means, spudge up the cable for the Honor 8 finger print sensor and cost-free the rear panel.

Tip 4 (Huawei Honor 8 Exterior Midframe).

Get rid of the adhering to 16 Phillips screws.

With a triangle opening device, work around the Honor 8 phone and also remove the outside midframe.

Step 5 (Huawei Honor 8 Front-Facing Camera and also Dual-Lens Rear-Facing Camera).

Pry the battery port off the motherboard.

Remove the 8-megapixel as well as separate Honor 8 front-facing selfie cam.

Use the spudger to detach and pluck out the 12-megapixel Honor 8 dual-lens rear-facing video camera.

Action 6 (Huawei Honor 8 Motherboard).

Disconnect the bunch of cable televisions from the Huawei Honor 8 motherboard.

Remove the following Phillips screw.

Conveniently draw out the motherboard from the Huawei smart device.

Action 7 (Huawei Honor 8 Earpiece Speaker).

Make use of the tweezers in order to help eliminate the Honor 8 Earpiece Speaker from the framework.

Step 8 (Huawei Honor 8 Loudspeaker, Headphone Jack, USB-C Port/Daughterboard, Signal Cable, and Vibrator).

With the spudger in hand, disconnect and also pry up the Honor 8 speaker.

Separate the signal cord, adjoin wire, and also headphone jack port from the daughterboard.

Separate the Honor 8 earphone jack.

Remove the daughterboard from the midframe. It consists of the Honor 8’s USB-C port and key microphone.

Raise out the signal wire, and after that with the tweezers eliminate the spring-contact-connected Honor 8 vibe.

Step 9 (Huawei Honor 8 Battery).

The Honor 8 battery is well wedged and also adhered in position. Utilize a playing card to thoroughly free it from the glue safeguarding it to the midframe.

Raise out the 3000 milliampere-hour (mAh) Huawei Honor 8 battery.

Action 10 (Huawei Honor 8 Display Assembly).

Peel up the display screen cord from the Honor 8 midframe.

Begin to free the Honor 8 display assembly by utilizing the heat gun to heat up the sticky safeguarding it to the midframe.

With the precision blade create enough space to insert a playing card.

Make use of a mix of playing cards and also a triangle opening tool to strike the adhesive. Take your time and also apply extra warm as needed.

When you have actually sliced via the adhesive, be conscious of the screen wire when decoupling the Honor 8 screen from the midframe.

* To reassemble your gadget, adhere to the action in reverse order.