ZTE Axon 7 Teardown Guide – Fixez.com

https://www.fixez.com presents the main ZTE Axon 7 Teardown Guide. This detailed DIY repair video will reveal you ways to replace a broken or damaged Axon 7 screen assembly, and the best ways to entirely teardown your ZTE phone. Browse through Fixez.com for all the ZTE Axon 7 substitute parts, screens as well as devices you need to rapidly, as well as cost effectively, fix your device! https://www.fixez.com

If you need your Axon 7 repaired ASAP rather- we have you covered there too. Contact among our competent service technicians at 866-233-6460 or [email protected] and also they will certainly repair your ZTE smart device for you. They are readily available Monday to Friday, 9am to 5pm PST.

Register for our YouTube Channel for extra DIY smartphone and also tablet teardown and also repair work video clips! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

ZTE Axon 7 Teardown Guide Video Transcription:

Caution:

You are doing this fixing at your very own risk
We declare no obligation for any kind of problems that could occur

The DIY Axon 7 fixing tools used in this video clip could be located below: https://www.fixez.com/categories/repair-tools

Action 1

Power down your ZTE Axon 7 smart device.

Action 2 (ZTE Axon 7 SIM as well as microSD Card Tray).

Expel the SIM and microSD Card Tray.

Action 3 (ZTE Axon 7 Rear Case).

Apply warm to the audio speaker grills located at the top as well as bottom of the ZTE phone.

Place the precision blade underneath the top grill as well as develop enough area to fit a triangular tool.

Work the triangular device under the grill and eliminate it from the Axon 7.

Now turn your attention to the audio speaker grill below the tool. Use the precision blade as well as triangle tool to separate the grill.

Get rid of the complying with 6 Phillips screws.

Once again, use the accuracy knife to develop space as well as put a triangular device.

Launch the clips and stand out the ZTE Axon 7 out of its back instance.

The fingerprint visitor cable is still linked to the motherboard, so don’t try to eliminate it entirely just.

Remove the connector as well as separate the phone from its light weight aluminum complete metal unit.

Step 4 (ZTE Axon 7 Fingerprint Reader and Flash Cable).

Thoroughly peel up the black tape from the Axon 7’s back situation.

Different the Axon 7’s without effort put tip finger scanner as well as the flash cable from the tape.

Tip 5 (ZTE Axon 7 Battery).

Get rid of the complying with Phillips screw safeguarding the metal brace covering the battery connector and also adjoin cord.

With the brace off the beaten track, separate the ZTE Axon 7 battery from the motherboard.

Eliminate the complying with 2 Phillips screws then the metal brace.

Separate and get rid of the Axon 7 interconnect wire.

The Axon 7 battery is well wedged and stuck in position. Make use of a mix of the triangle tool and also spudger to meticulously complimentary it from the adhesive safeguarding it to the midframe.

Lift out the 3250 milliampere-hour (mAh) Axon 7 battery.

Action 6 (ZTE Axon 7 Motherboard).

Remove the complying with 4 Phillips screws.

Spudge up the display screen connector and also power and quantity switches wire.

Raise the Axon 7’s motherboard as well as detach the port on its bottom, after that remove it from the phone.

Action 7 (ZTE Axon 7 Rear-Facing Camera and Front-Facing Camera).

Disconnect as well as pluck out the 20-megapixel ZTE Axon 7 rear-facing camera.

Separate as well as remove the 8-megapixel Axon 7 front-facing selfie cam.

Step 8 (ZTE Axon 7 Earpiece Speaker).

Use the tweezers to pry the Axon 7’s stereo-enabling earpiece audio speaker out of the framework.

Step 9 (ZTE Axon 7 Daughterboard/USB-C Port, Vibrator, and also Loudspeaker).

Get rid of the following 3 Phillips screws.

Disconnect the signal wire from the daughterboard.

With a little spudgering the Axon 7 daughterboard is cost-free. It includes the USB-C port and also main microphone.

Make use of the tweezers in order to help eliminate the spring-contact-connected vibrator as well as ZTE Axon 7 loudspeaker.

Step 10 (ZTE Axon 7 Power and also Volume Buttons Cable).

The last element to give up is the power and also volume switches cable television.

Step 11 (ZTE Axon 7 Display Assembly and also Home Button).

Start also free the Axon 7 screen setting up by utilizing a heat weapon to soften the sticky safeguarding it to the midframe.

Utilize a plastic triangle tool to attack the adhesive. Take your time and apply added warm as required.

Be conscious of the display screen cord when decoupling the ZTE Axon 7 screen from the midframe when you have actually sliced through the sticky.

* To reconstruct your gadget, comply with the action in reverse order.

Cell Phone Repair Guys Inc/M3N Inc. © 2022: iPhone Screen Repair Frisco | iPad Glass Repair | Cell Phone Repair Frisco, All Rights Reserved. Cell Phone Repair Guys Inc/M3N Inc. Disclaimer iPhone®, iPod®, iPad® are trademarks of Apple, Inc. Android ™ is a trademark of Google, Inc. Blackberry® is owned by Research in Motion Limited and is registered in the United States and may be pending or registering in other countries. All other trademarks are the property of their respective owners. Cell Phone Repair Guys Inc/M3N Inc. is in no way endorsed, sponsored, or affiliated with any of the above mentioned entities or subsidiaries thereof. Please read the disclaimer and terms for details. | Innovation Theme by: D5 Creation | Powered by: WordPress
Call Now!