Asus ZenFone 2 Screen Repair, Teardown and Reassemble Guide – Fixez.com

This step-by-step repair video will certainly show you exactly how to change a damaged or broken ZenFone 2 screen assembly, as well as additionally exactly how to entirely teardown and also reconstruct your Asus phone. Go to Fixez.com for all of the DIY Asus ZenFone 2 substitute tools, displays as well as parts you need to quickly, as well as economically, fix your device!

If you need your ZenFone 2 repaired ASAP instead- we have you covered there too. Call among our skilled technicians at 866-233-6460 or [email protected] and they will repair your Asus mobile phone for you. They are readily available Monday to Friday, 9am to 5pm PST.

Register for our YouTube Channel for added DIY smart device as well as tablet teardown as well as fixing videos! https://www.youtube.com/channel/UCDJrZCUtdJQaJq0akRCt3Ng
Like us on Facebook: https://www.facebook.com/fixez.com
Follow us on Twitter: https://twitter.com/fixezdotcom

Asus ZenFone 2 Screen Repair, Teardown and also Reassemble Guide Video Transcription:

Warning:

You are executing this fixing at your very own danger
We assert no obligation for any damages that could happen

The DIY Asus ZenFone 2 repair devices used in this video could be found right here: https://www.fixez.com/categories/repair-tools

Action 1

Power down your Asus ZenFone 2.

Action 2 (Asus ZenFone 2 Rear Battery Cover).

Utilize the plastic triangular opening tool, or your finger nails, to function around the ZenFone 2 back cover and also launch the plastic clips protecting it in position.

Action 3 (Asus ZenFone 2 Exterior Midframe).

Eliminate the adhering to 14 Phillips screws.

Easily divide the exterior midframe from the Asus phone.

Step 4 (Asus ZenFone 2 Battery, Loudspeaker, as well as Dual-SIM as well as microSD Card Slots).

Detach the ZenFone 2 battery from the motherboard.

Utilize the spudger to pry up the speaker.

Separate the adjoin cord from the motherboard.

Eliminate the Kapton tape, and also remove the adjoin cable from the daughterboard.

Gradually draw the strip up as well as away from the Asus ZenFone 2. The strip will extend to numerous times the size of the battery- maintain drawing up until it comes out from between the midframe and the battery.

As well as easily, out comes the 3000 milliampere-hour (mAh) Asus ZenFone 2 battery.

The ZenFone 2 battery is highly abided by a protective metal cover, but with a little spudgering it is readily released.

Step 5 (Asus ZenFone 2 Motherboard).

Peel up the copper tape as well as then stand out off the steel guard.

Disconnect the display cords as well as signal cable.

With the spudger in hand, pry up as well as eliminate the ZenFone 2 motherboard.

Action 6 (Asus ZenFone 2 Rear-Facing Camera as well as Front-Facing Camera).

Launch the ZIF port and remove the 13-megapixel Asus ZenFone 2 rear-facing electronic camera.

Remove the 5-megapixel ZenFone 2 front-facing camera from the motherboard.

Step 7 (Asus ZenFone 2 Earpiece Speaker, Vibrator, as well as Daughterboard).

Pluck out the spring-contact-connected ZenFone 2 earpiece speaker.

Utilize the tweezers to liberate the vibrator as well as detach from the chassis.

Lift out the daughterboard. It includes the ZenFone 2’s micro-USB port and headphone jack.

Tip 8 (Asus ZenFone 2 Display Assembly).

Peel up the screen wire from the ZenFone 2 midframe.

Start to release the Asus ZenFone 2 screen assembly using the warmth weapon to heat up the adhesive.

With the precision blade produce adequate space to place a having fun card.

Utilize a mix of playing cards as well as a triangular opening tool to assault the adhesive. Take your time as well as apply additional warm as required.

As soon as you have actually sliced with the glue, bear in mind the display screen cord when decoupling the ZenFone 2 display from the midframe.

* To rebuild your gadget, adhere to the action in reverse order.